Photoluminescent Safety Tape (Abrasive - Non-Slip) - 1 Case (12 Rolls of 1" x 60')
- Emergency Egress/Safety Tape
- Thin gauge polyester with high tack adhesive
- MEA # 235-05-M
- Abrasive, non-slip, high traction surface
- Requires continued exposure to at least 54 LUX illumination
- Indoor use only
- Explosion proof
- Meets New York City Building Code Reference Standard RS 6-1 & 6-1A and Local Law 26
A simple way to add additional emergency egress signage. Meets stringent New York City safety codes (New York City Building Code Reference Standard RS 6-1 & 6-1A and Local Law 26 of 2004). Tape is highly visible, displaying a safe evacuation path in the event of emergency.
No electricity or battery required. Easily affixes to walls, handrails, columns, around door frames, and along stairways and baseboards. Non-slip, high-traction surface allows for placement on floors and stair steps. Under normal lighting conditions, highly visible. In the event of low (or absence of) lighting due to power failure the tape will "glow-in-the-dark" - must be "charged" to glow, requires exposure to 54 LUX (5-ft candles) of fluorescent, metal halide or mercury vapor light illumination.
Existing tape must be removed first, using a heat gun to warm the existing material and then get an edge started or use scraper. Any residual adhesive can be removed with a commercial solvent adhesive remover.
This product sold by case: 12 Rolls.