Aluminum Photoluminescent Exit Sign | Red, Green & Black | 50', 75', and 100' Viewing Distance
Base Code: PA2
Items marked FAST SHIP typically ship same day if order is placed before noon
$65.00
UL Listed with minimum illumination of 90 minutes up to a distance of 50 feet. No electricity, wiring, nor batteries are required. Charging this glow in the dark exit sign requires 54 LUX (5-ft candles) of LED, fluorescent, metal halide or mercury vapor light for 60 minutes.
Unlike power free Tritium exit signs, the PA2 series are convenient and easy to:
- Dispose Of (No Disposal Fees)
- Handle - No need for special handling
- Install - Easily move sign if path of egress changes
- No Lead Times
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
Photoluminescent
This product uses long lasting, electricity free Photoluminescent Lighting (Glow in the Dark) Technology.
No Electricity
This unit doesn't require electricity or a battery.
Features
- UL 924, NEC and NFPA 101 Life Safety Code
- Listed for damp locations
- No electricity, no batteries required
- Operating Temperature 50°F – 104°F
- Life Expectancy 20 years
- Field installable arrow configuration
- 50, 75, 100 foot viewing distance
- 90 minutes of illumination
- Requires 54 LUX (5-ft candles) of LED, fluorescent, metal halide or mercury vapor light to charge material for 60 minutes
- Explosion proof
- Indoor/Outdoor installation
- No future hazmat disposal needed
- Aluminum frame available
Previous Product Codes: PA2, PAR2, PAG2
Specifications
| Dimensions (May Vary by Model) | |
| Height | 9" |
| Length | 16.25" |
| Weight | 4.00 lb |
What's included?
- RED, GREEN, or BLACK Photoluminescent Exit Sign
- Two adhesive arrows
- Mounting bracket
- Aluminum Frame (No Frame option, removes frame)
- Installation Instructions
Construction
The PA2 exit sign is made from durable rigid aluminum base.
Illumination
The PA2 exit sign has a viewing visibility range of 50-100 feet (must select desired viewing distance). Provides consistent, uniform illumination.
Emergency Operation
Upon failure of the normal utility power the PA2 exit sign will provide at least 90 minutes of illumination.
*The sign must be charged for a minimum of 60 minutes to become fully operational.
Battery - Battery Backup
The PA2 exit sign does not require batteries to operate.
Electrical Components
The PA2 exit sign does not use nor require any type of electrical components.
Installation
The PA2 exit sign is suitable for wall, ceiling, and side mount installation. For non-framed options, pre-made holes are found on each corner of exit sign for easy wall mount installation or double-sided tape can be used for mounting (not provided). Two self-adhesive chevrons are supplied with each sign that allows for fast and easy field configuration. The mounting bracket supplied, does not come with pre-drilled holes to allow installer to match existing mounting holes if necessary. This sign is suitable for both indoor and outdoor installations. However, prolonged exposure to direct sunlight in outdoor settings may lead to some discoloration. The photoluminescence of the lettering itself is not expected to be significantly affected by sunlight exposure. Avoid installing the exit sign in areas susceptible to water or rain exposure.
Mounting Configurations Explained
View Installation Instructions
Dimensions
Customer Questions & Answers
Post a question and have an expert answer
Q
Walter E Croteau • 08/13/2023, 9:48:16 PM
On the PA2 EXIT signs, are the Arrows prepunched for removal, or is that a special order item?
A
Exit Light Co.
The PA2 series exit sign comes with 2 adhesive arrows that can be added as needed. No need to specify arrow direction at the time of check out.