Red LED Thin Exit Light Combo | Fully Adjustable Lamp Heads
Base Code: COMBOT-R
Items marked FAST SHIP typically ship same day if order is placed before noon
$28.00
A thin, low-profile Combo Exit Sign. If you're looking for an exit lighting solution that doesn't take over your decor, this is the sign for you. This sleek design is less than 2” in width, including the rectangular adjustable lamp heads. This sign meets all the same requirements and listings as a standard unit and can be used almost anywhere! This exit sign operates 120-277 VAC. Includes a mounting canopy that allows for ceiling mount. Includes a lightweight, maintenance-free Ni-MH battery, that provides 90 minutes of emergency power in case of a power failure. Two “exit” faceplates and a blank faceplate are provided. The faceplates have two knock-out chevrons for easy customization.
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
LED Lighting
This product uses energy efficient and long lasting LED's.
Battery Included
This product contains a battery for backup power. The battery must be connected during installation.
Features
- UL 924, NEC, OSHA and NFPA 101 Life Safety Code
- Two 300° adjustable LED lamps
- Injection-molded, high-impact, UL94 V-0 thermoplastic construction
- 120-277 VAC operation
- Universal mounting pattern knock-out in back plate for J-box mounting
- Knock-out left/right arrows
- Test switch and charge indicator
- Innovative and easy installation in minutes
Specifications
| Dimensions (May Vary by Model) | |
| Width | 16.92" |
| Height | 7.59" |
| Depth | 1.02" |
| Weight | 7.00 lb |
What's included?
- Thin RED LED Combo Exit Sign
- Two "EXIT" Faceplates (with optional knockout arrows)
- One Blank Faceplate
- Mounting Canopy, Installation Instructions & Hardware (Inside Unit)
- Battery (Inside Unit) - Must connect the battery after installation
Construction
The COMBOT series is contructed from injection-molded, high-impact, engineering-grade, UV-stabilized, UL 94 V-0 thermoplastic. White housing is standard.
Illumination
Emergency lamps use long-lasting, energy efficient ultra bright white LEDs. Heads are made with high-performance chromeplated reflectors and polycarbonate lenses for optimal light distribution. Exit portion uses Red or Green LEDs.
Emergency Operation
Upon failure of the normal utility power, an internal solidstate transfer switch automatically provides uninterrupted emergency operation for at least 90 minutes. The fully automatic solid-state, two-rate charger initiates recharging a discharged battery within 24 hours.
Battery - Battery Backup
The COMBOT Thin Combo Exit Sign series is designed with 2 maintenance-free Ni-MH batteries - (1) 1.2V 1000mAh and (1) 2.4V 1000mAh battery - that provides an emergency duration of 90 minutes. Recharge time of the battery is 24 hours.
Operational Temperature
| Temperature Ratings | |
| Standard Option | 0°C to 40°C / 32°F to 104°F |
Photometrics
Total Luminaire Lumens : 157lm
Electrical Components
120-277 VAC operation. LED display indicates AC/ON. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit.
Installation
The COMBOT is suitable for surface wall and top mounting via included canopy. Snap together design allows for quick and easy installation. Knock-out chevrons for customized egress signage.
Mounting Configurations Explained
View Installation Instructions
Dimensions
Customer Questions & Answers
Post a question and have an expert answer
Q
Isreali Thomas • 05/04/2021, 7:14:44 PM
Do you have the signs that plug in? And sensor lights on them?
A
Exit Light Co.
We currently do not sell exit signs with sensor lights on them. Our signs are meant for emergency use when the power shuts off from the building.
Q
Nick Ballesteros • 01/19/2023, 2:01:46 PM
If these are set in an unlit or poorly lit room will the emergency lights always remain on?
A
Exit Light Co.
No, the emergency lights will only turn on when a power loss is detected in the building's electrical system. The lights will stay on for a minimum of 90 minutes, using the battery inside the unit for power.
Q
Marty • 05/23/2023, 11:55:31 AM
We have several of these, and need replacement batteries, but are unable to find the ones with the correct connector in the OEM size. Do you carry them? If so, can you email me a price and part# for each of the two batteries? Thank you
A
Exit Light Co.
Our website recommends keeping the old connectors to splice with the new ones. Please see this video for step-by-step instructions: https://www.youtube.com/watch?v=o3mO1cqlfhA
Q
Don camillo • 06/08/2023, 12:16:23 PM
My building inspector is requiring me to have a light turn on if the power goes off ,with this product do that
A
Exit Light Co.
Yes, the COMBOT-R unit is designed to come on when power loss is detected in the building. The lights will stay on for a minimum of 90 minutes.
Q
John A Erickson • 11/05/2023, 9:19:30 PM
Do these meet fire codes
A
Exit Light Co.
Yes, the our COMBOT series is meets or exceeds the following listings: UL 924, NEC, OSHA and NFPA 101 Life Safety Code.
Q
Charles Weintritt Davis Products Co Inc 223 Martin Luther King Dr Bogalusa La 70427 • 11/08/2023, 8:17:33 AM
Please advise the lumen output on Combot- R and ComboJR2 Lights
A
Exit Light Co.
The COMBOT series puts out a total of 157lm while the COMBOJR2 series puts out a total of 235lm.
Q
William L. Wagner • 01/08/2024, 2:46:37 PM
Can hard wired exit light be on 24 hours per day, then with power failure will it stay on for 90 minutes?
Thank you.
A
Exit Light Co.
Yes, the unit is hard wired and the "EXIT" sign portion is lit all the time. The emergency lights on the side of the unit will turn on only when a loss of power is detected. They will stay on for a minimum of 90 minutes.
Q
Chris Gage • 01/18/2024, 10:43:02 AM
How many to a case?
A
Exit Light Co.
There are qty 4 COMBOT-R units per case.
Q
Peter J Latkovich • 02/02/2024, 8:23:05 PM
Does this unit have a test feature for the fire inspector?
A
Exit Light Co.
From our website for the COMBOT-R unit: An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit.
Please note that this unit is not Self-Testing.