Emergency Lights | Wet Location Halogen Lamps
Base Code: ELCEL-WETMR16
Compatible Battery: B6V4A
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
This unit produces High Ouput Halogen light.
This unit contains a battery for backup power. The battery must be connected during installation.
- UL 924, NEC and NFPA 101 Life Safety Code
- Wet Location Rated
- Dual 120 or 277 VAC input
- Fully gasketed fiberglass corrosion-resistant enclosure
- Includes two 6V 7.2 watt MR16 halogen lamps
- Solid state charging circuit
- Short circuit and overload protection on DC output circuit
- Low voltage disconnect (LVD)
- Maintenance-free sealed battery
- Sealed momentary push-to-test switch
Previous Product Codes: EL-WETMR16
- Wet Listed MR16 Emergency Light
- Installation Instructions & Hardware
- SLA Battery - Must connect the battery after installation (Located inside unit)
Contructed from corrosion resistant 5VA flame retardant thermoplastic enclosed in a fully gasketed polycarbonate shield. Resistant to corrosive atmosphere and non-hazardous dust environments. Designed to withstand hose-downs, water spray and splashing water. Grey housing is standard.
The ELCEL-WETMR16 Emergency Light uses two 7W adjustable MR16 lamps. Heads are constructed from high impact thermoplastic and are enclosed in a fully gasketed polycarbonate enclosure.
Upon failure of the normal utility power, an internal solidstate transfer switch automatically provides uninterrupted emergency operation for at least 90 minutes. The fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Battery - Battery Backup
The ELCEL-WETMR16 series is designed with a maintenance-free 6 volt 4.5 mAh sealed lead acid battery that provides a minimum emergency duration of 90 minutes. Recharge time of the battery is 24 hours. Operational temperature range is 65°F (19°C) to 85°F (30°C).
Total Luminaire Lumens : 20.7 Per Lamp
Standard mounting height of 7.5ft multiple units illuminate 1 footcandle (FC) spaced at 24ft for a 3ft path of egress At a mounting height of 7.5ft, multiple units illuminate 1 FC spaced at 20ft for a 6ft path of egress
Dual voltage input 120/277 VAC operation. LED display indicates AC/ON. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit. Unit offers surge protected, solid state circuitry.
ELCEL-WETMR16 emergency unit uses two 7W adjustable MR16 lamps. Heads are constructed from high impact thermoplastic and are enclosed in a fully gasketed polycarbonate enclosure.View Installation Instructions