Premium Grade NEMA 4X Wet Location LED Emergency Light | LiFEPO4 | Cold Temp & 1450 Lumen Options
Base Code: EL-WETLED
Items marked FAST SHIP typically ship same day if order is placed before noon
$58.00
This wet location emergency light provides a stylish and practical solution to your outdoor emergency lighting needs. A crisp white thermoplastic housing is enclosed with a clear polycarbonate lens and fully gasketed. UL Listed for use in NEMA4X rated areas. The unit offers several levels of protection against the elements, including dust, dirt and water. Fully adjustable MR16-style swivel heads are updated with long life, high output LEDs.
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
LED Lighting
This product uses energy efficient and long lasting LED's.
Battery Included
This product contains a battery for backup power. The battery must be connected during installation.
Features
- UL 924, NEC, OSHA and NFPA 101 Life Safety Code
- NEMA 4X Wet Location Rated
- Universal 120-277VAC 50/60Hz
- Fully gasketed corrosion-resistant enclosure
- Includes two high output LED lamps
- Solid state charging circuit
- Short circuit and overload protection on DC output circuit
- Low voltage disconnect (LVD)
- Sealed momentary push-to-test switch
Specifications
| Dimensions (May Vary by Model) | |
| Height | 5.76" |
| Depth | 4.30" |
| Length | 13.33" |
| Weight | 4.00 lb |
What's included?
- Wet Listed All LED Emergency Light
- Installation Instructions & Hardware
- LiFePO4 Battery - Must connect the battery after installation (Located inside unit)
Construction
Built with a durable NEMA 4X rated plastic enclosure, it features 5VA flame-retardant and UV-resistant properties, ensuring long-lasting performance and safety. Polycarbonate lens is UV stabilized but some discoloration may occur over time if installed in direct sunlight.
Illumination
Emergency lamps use long-lasting, energy efficient ultra bright white LEDs. 4 high output LEDs per head. Lumen output: 220 - 1450lm.
Emergency Operation
Upon failure of the normal utility power, an internal solidstate transfer switch automatically provides uninterrupted emergency operation for at least 90 minutes. The fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Battery - Battery Backup
The EL-WETLED series is designed with a maintenance-free LiFePO4 battery that provides a minimum emergency duration of 90 minutes. LiFePO4 batteries are known for their longevity, safety, and efficiency. With LiFePO4 batteries, safety is paramount – their formulation, lithium iron phosphate, is highly resistant to overheating and fire hazards. They are backed by an integrated battery management system (BMS) to prevent overcharge, over-discharge, and short-circuiting, ensuring peace of mind for users. Recharge time of the battery is 24 hours.
Battery Backup: 3.2V 1500mAh
Self Testing: 6.4V 4000mAh
Operational Temperature
| Temperature Ratings | |
| Standard Option | 41°F to 122°F |
| Expanded Temperature | -4°F to 122°F |
Photometrics
Total Luminaire Lumens : 220-1450lm
Input Wattage: 1.9W
Contact us to request the IES file for the ST-HO model.
Suggested mounting height of 7.5ft illuminates 1 footcandle (FC) spaced at 35ft for a 3ft path of egress (Battery Backup Model)
Mounting height of 7.5ft illuminates 1 footcandle (FC) spaced at 118ft for a 3ft path of egress (Self-Testing Model)
Disclosure:
Spacing is measured in lab condition with an assumed open space,
no obstruction and reflection rates of 80 (ceiling) / 50 (walls) / 20 (floor).
Actual spacing may vary depending on what environment the fixture is installed
in.
Self-Testing Option
Unit continuously monitors the AC power, battery supply voltage, emergency lamp condition and charging circuit. If failure is detected, the indicator will show status and correct when adjusted. Unit will automatically perform NFPA required monthly and annual testing. Refer to user manual for details.
Electrical Components
Universal voltage input of 120-277VAC 50/60Hz input. LED display indicates AC/ON. An external push button test switch with battery backup units allows maintenance personnel to quickly determine the operational status of the unit. Unit offers surge protected, solid state circuitry.
Electrical Specifications
| Series | Input Voltage | Power Consumption | Current | Discharge Duration |
|---|---|---|---|---|
| EL-WETLED-BB-CW | 120-277VAC 50/60Hz | 3W |
40mA | 90 Minutes |
| EL-WETLED-STHO | 120-277VAC 50/60Hz | 5W | 70mA | 90 Minutes |
Installation
The EL-WETLED Wet Listed Emergency Light can be both wall and ceiling mounted. The outside housing is designed with a universal knock-out pattern that adapts to different j-box configurations.
Mounting Configurations Explained
View Installation Instructions
Dimensions
View Common Questions or Ask Your Own Below
Post a question and have an expert answer
Q
Shane • 03/22/2019, 10:08:09 PM
Will this product not illuminate properly under power loss situations under 50°?
A
Exit Light Co.
This unit is designed to operate in temperature ranges of 50°F (10°C) to 104°F (40°C). We cannot guarantee proper function in any temperatures below or above the stated range.
Q
Jay Rossi • 03/25/2019, 10:50:37 AM
The EL-WETLED can I wire it to be used for day to day lighting off a switch, and upon power loss switch to battery back-up? or is it emergency service only???
Jay
A
Exit Light Co.
This unit is designed as an emergency light only. It is not designed to work off a light switch.
Q
AW • 04/07/2019, 11:48:14 AM
Can the EL-WETLED emergency light operate with a 230VAC power supply?
A
Exit Light Co.
Thank you for your inquiry. This unit has dual voltage input of 120/277VAC operation. So the unit will not operate with a 230VAC power supply.
Q
Diyaa AbdelRazeq • 07/22/2019, 1:51:59 AM
What is the WATT for each LED head?
A
Exit Light Co.
This unit consumes 1.9 watts. Each lamp head has an output of 57.9 lumens.
Q
Terry • 06/16/2020, 0:59:20 AM
The description states that these can be deployed outdoors, but the operating temp is quite narrow, with a minimum of 50F. In Texas, the temperature has gone down into the twenties before. Do you have a fixture with a wider temperature range?
A
Exit Light Co.
Our EL-XD with the expanded temperature ratings can go as low as -22f.
Q
Jim King • 08/18/2020, 2:12:02 PM
Is this fixtured rated for a walk in cooler?
A
Exit Light Co.
The Operational temperature range is 50°F (10°C) to 104°F (40°C).
Q
jim wwijson • 08/19/2020, 7:47:21 PM
I want to mount the outside for the fire department
On my fire escapes does it work in cold weather light down to 0° Fahrenheit
A
Exit Light Co.
The Operational temperature range is 50°F (10°C) to 104°F (40°C).
Q
Will • 05/20/2024, 1:06:42 PM
Is this NYC compliant?
A
Exit Light Co.
No, the EL-WETLED is not NYC approved. To see a complete list of all our NYC compliant products, please click:
https://www.exitlightco.com/search.html?Search=NYC