New York City Approved Wet Location Exterior Exit Sign | Red LED | NEMA 4X Rated
Base Code: NYC-WLT-R
NEW! The NYC-WLT series has arrived at ELC. This exit sign is engineered to withstand the extreme weather conditions of New York City. The NYC-WLT exit sign meets or exceeds NEMA 4X and meets the building codes of NYC. Suitable for all types of installation types: parking garages, breezeways and other environments where additional protection is needed. No more worrying about dead batteries, internals, etc. due to weather, this exit sign is designed with a fully gasketed enclosure.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
This unit uses energy efficient and long lasting LED's.
This unit contains a battery for backup power. The battery must be connected during installation.
- UL 924, NEC, NYC, NEMA 4X and NFPA 101 Life Safety Code
- Listed for wet location
- Ultra bright LEDs
- Suitable for top, side, and wall mount installations
- Push-to-test switch
- 120/277 VAC operation @ 60Hz
- Extremely low operating costs
- Removable directional indicators
- UV stabilized polycarbonate enclosure
- Maintenance free NiCad battery
- RED LED Exit Sign
- One "EXIT" Faceplate (with optional knockout arrows)
- One Blank Faceplate
- Mounting Canopy, Installation Instructions & Hardware
- 3M Gasket
- 4 Mounting Bracket Tabs
- NiCad Battery - Must connect the battery after installation
The NYC-WLT exit sign enclosure is made of UV-stable, reinforced .23" thick polycarbonate and is fully gasketed to provide protection for internal components. The housing also provides protection against corrosion and the formation of ice.
Illumination of the NYC-WLT Series is accomplished by utilizing high-intensity, long-life LEDs exceeding UL 924 requirements for brightness and uniformity. LEDs provide excellent illumination while maximizing energy efficiency. LEDs are a maintenance-free solution, providing up to 100,000 hours of use.
Upon failure of the normal utility power, an internal solid-state transfer switch automatically provides uninterrupted emergency operation for at least 90 minutes. The fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Battery - Battery Backup
The NYC-WLT series is designed with a maintenance-free NiCad battery that provides a minimum emergency duration of 90 minutes. Recharge time of the battery is 24 hours. The battery is protected by a low voltage cut-off circuit.
|Standard Option||32 °F to 104 °F|
Dual voltage input 120/277 VAC operation at 60Hz. LED display indicates AC/ON. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit.
The NYC-WLT series exit sign is designed with a universal mounting pattern for 3” and 4” J-box (gasket included) and rear keyhole slots are provided for wall mounting. Conduit entry available at multiple locations from top or sides; when using conduit the included 4 mounting brackets must be used. Pendant mount also available.