Photoluminescent 'Not An Exit' Sign

Base Code: PNE-D

Items marked FAST SHIP typically ship same day if order is placed before 2PM

Photoluminescent 'Not An Exit' Sign

Lead Time: 3-5 Day

A simple way to add additional emergency egress signage. Identifies emergency evacuation route.

No electricity or battery required. These signs can be easily placed on any flat surface using double-sided tape (not included). Under normal lighting conditions, these signs are highly visible. In the event of low (or absence of) lighting due to power failure the signs will "glow-in-the-dark." (Signs must be "charged" to glow, requires exposure to 54 LUX (5-ft candles) of fluorescent, metal halide or mercury vapor light illumination).
Photoluminescent Glow In the Dark Lighting

This unit uses long lasting, electricity free Photoluminescent Lighting (Glow in the Dark) Technology.

This unit does not require use of electricity or a battery

No Electricity
This unit doesn't require electricity or a battery.


  • Meets New York City Building Code Reference Standard RS 6-1 & 6-1A and Local Law 26
  • Meets UL 1994
  • Emergency Egress/Safety Sign
  • Explosion proof semi-rigid plastic
  • No power or wiring required
  • Requires continued exposure to at least 54 LUX illumination
  • Indoor use only

Previous Product Codes: PNE-D


Weight2.00 lb
Photoluminescent 'Not An Exit' Sign Dimensions


This photoluminescent Egress Sign is constructed with non-toxic, non-radioactive Glo Brite ® photoluminescence technology.


Under normal lighting conditions, these signs are highly visible.  In the event of low or no lighting due to power failure, the lettering on the signs will "Glow in the Dark".  (Signs must be "charged" to glow -- requires 54 LUX (5ft candles) of LED, fluorescent, metal halide or mercuty vapor light illumination for 60 minutes).  

Emergency Operation

Upon failure of the normal utility power, this unit will provide at least 90 minutes of illumination.  *This sign must be charged for a minimum of 60 minutes prior to being fully operational.


No electricity or battery required. These signs can be easily installed using one of the four following methods (Instructions Provided):

1) Peel and Stick

2) Foam Tape

3) Mechcanically Fasten

4) Construction Adhesive

Mounting Configurations   Mounting Configurations Explained

PDF Download   View Installation Instructions

No Questions asked yet!
Post a question and have an expert answer