Adjustable Recessed LED Emergency Light | New Work or Remodel Can | 120/277VAC
Base Code: EL-RG6


Compatible Battery: B6V4A

UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

LED Lighting
This product uses energy efficient and long lasting LED's.

Battery Included
This product contains a battery for backup power. The battery must be connected during installation.
Features
- UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
- 120/277V operation
- Aluminum housing with plastic gimbal trim
- IC rated for direct contact with insulation
- Uses one 6V 8W halogen lamp
- LED indicator light and test switch
- Low voltage battery disconnect protected
- Housing adjusts 1.375" to accomodate various ceiling thicknesses
Specifications
Dimensions (May Vary by Model) | |
Width | 8" |
Height | 7.125" |
Diameter | 7" |
Weight | 9.00 lb |
What's included?
- 6" Adjustable Recessed Emergency Light
- Installation Instructions & Hardware
- SLA Battery - Must connect the battery after installation (Located inside unit)
Construction
The EL-RG6 is constructed with a steel mounting frame and 6" steel recessed housing with mounting bar hangers. The impact-resistant thermoplastic adjustable trim is securely attached to housing with spring clips. Remodel can option is also constructed from durable steel. Junction box is designed with 3/4" knockouts for AC input.
Illumination
The EL-RG6 series has an adjustable, ultra-bright 1.5W LED lamp; The sealed beam gimbal trim with smooth chrome-plated reflector and plastic lens offers optimal light distribution.
Emergency Operation
Upon failure of the normal utility power, an internal solid-state transfer switch automatically provides uninterrupted emergency operation for at least 90 minutes. The fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Battery - Battery Backup
The EL-RG6 Emergency Light comes with maintenance-free 6V 4.5Ah rechargable sealed lead acid batteries.
Electrical Components
Dual 120/277 voltage. Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. LVD (low voltage disconnect) prevents battery from deep discharge.
Installation
The EL-RG6 is available with your choice of a new work can or a remodel can (retrofit can). New work cans are designed for new construction projects, where the housing is installed before the ceiling is finished and securely attached to the framing. Remodel cans, on the other hand, are ideal for retrofit applications, where the ceiling is already finished. They are installed by cutting an opening in the ceiling and securing the housing with mounting clips, making them a convenient solution for upgrades or renovations.
Mounting Configurations Explained
View Installation Instructions
Dimensions

View Common Questions or Ask Your Own Below