NYC 8'' Lettering Photoluminescent Exit Sign

Base Code: ELCNYCPA-R


NYC 8'' Lettering Photoluminescent Exit Sign
Processing...
$218.00

Qty

UL 924 listed. 8" Lettering Approved for New York City Standards. No electricity or battery required. UL 924 listed and certified. Provides 50-foot viewing distance. Produced on plastic substrate. Sign comes with kit for LEFT and/or RIGHT arrows. Provides 90 minutes of illumination.

This product has been tested to meet all required U.S. standards by Underwriters Laboratories, Inc. (UL), the most widely recognized U.S. nationally recognized testing laboratory (NRTL).

UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

Photoluminescent Glow In the Dark Lighting

Photoluminescent
This unit uses long lasting, electricity free Photoluminescent Lighting(Glow in the Dark) Technology.

New York City Approved

New York City Approved
This product is approved for New York City.

Features

  • UL 924 & NFPA 101 Life Safety Code
  • LEED points qualified
  • No electricity, no batteries
  • Explosion proof, weatherproof
  • Four mounting holes provided
  • Requires 54 LUX (5-ft candles) of fluorescent, metal halide or mercury vapor light to charge material for 60 minutes
  • Install indoors only. Do not expose to direct sunlight
  • Long life expectancy
  • No future hazmat disposal needed

Previous Product Codes: PARNYC

Specifications

Dimensions
Width17"
Height10.5"
Weight4.00 lb
NYC 8'' Lettering Photoluminescent Exit Sign Dimensions

Construction

The ELCNYCPA-R series has a thin, low profile construction with 8" NYC approved lettering with 50' visibility. It has a durable plastic photoluminescent panel with an optional black plastic frame. This photoluminescent exit sign is explosion-proof for areas requiring explosion-proof exit signage.

Emergency Operation

Upon failure of the normal utility power the ELCNYCPA-R exit sign will provide at least 90 minutes of illumination. *The sign must be charged for a minimum of 60 minutes to become fully operational.

Installation

This unit is available for surface mount.  This unit can be mounted to the surface via screw or with adhesive (not included). Before installation it must be determined that there is a minimum of 5 Fc of fluorescent, LED, metal halide or mercury vapor light on the face(s) of the sign at all times during building occupancy.  


No Questions asked yet!
Post a question and have an expert answer